| Customization: | Available |
|---|---|
| After-sales Service: | Engineers Can Be Sent to The Worksite |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ITO Conductive Glass Magnetron Sputtering Vacuum Coating Machine
"Sputtering" is a vacuum process used to deposit very thin films on substrates. The large area horizontal on-line sputtering system is designed to continuously coat the metallic or compound layers on glass sheets for the production of reflective glass. The machine is fully automatic controlled and glass is continuously moving and coating from one end of the machine to the other. The available film series are solar control reflective glass, Low-e glass and mirror for a wide variety of commercial and scientific purposes.
It is performed by applying a high voltage across a low-pressure gas (usually argon at about 5 millitorr) to create a "plasma," which consists of electrons and gas ions in a high-energy state. (This is sometimes called a "glow discharge" process because the plasma emits a colorful halo of light.) During sputtering, energized plasma ions strike a "target", composed of the desired coating material, and cause atoms from that target to be ejected with enough energy to travel to, and bond with, the substrate.
During sputtering, energized plasma ions strike a "target", composed of the desired coating material, and cause atoms from that target to be ejected with enough energy to travel to, and bond with the substrate.
The magnetron sputtering glass coating line equips the latest technology in China for DC cathode, Twin-Mag cathode and Circle Rotary cathode. The machine could be applied widely on the field of reflective glass, Low-E glass, home mirror, automobile rear mirror, solar reflector, solar absorb, ITO coating, etc. the machine features continuous operation, mass capacity, fully automatical and stabile in quality, it is the good solution to instead of traditional coating process
Structure of the magnetron sputtering coating line
The vacuum coating production line is usually connected by more than three vacuum chambers to form a continuous working vacuum coating machine.
The vacuum coating line is mainly used for film coating on flat glass, acrylic, PC, PET substrates, various metal films, dielectric films, dielectric metal composite films, transparent conductive films and other film applications.
The industries involved in the vacuum coating line include the surface coating of plastic panels and display screens in mobile phones, electronics, home appliances and other industries.
The vacuum coating production line adopts molecular pump or diffusion pump to form advanced design with atmosphere isolation. The equipment uses turbo floating molecular pump to obtain high efficiency isolation, stable pumping speed and uniform gas distribution. In the case of pumping with a diffusion pump, the vacuum pumping rate is high and the equipment production cost is lower.
Vertical magnetron sputtering coating line
Horizontal magnetron sputtering coating line
The company can provide design according to user requirements, provide a full set of equipment, responsible for the process, according to "turnkey" engineering services.
Magnetron sputtering cathodes
Accorinf to different technical requirements of each customers, we can design different types of magnetron sputtering cathodes for the machine. This is the coating system of the machine. You can load different raw material to the cathodes for different coatings.
| Chamber type | Vertical and horizontal method of multi-chamber | |
| Applied material | Glass and Wafer, other plastic, metal materials | |
| Substrate size | Vertical type | 2,200mm x 2,500mm |
| Horizontal type | 1,500mm x 1,800mm | |
| Tact time | 60 sec or less (Static method) 35 sec or less (Dynamic method) | |
| Coating source | Sputter source | Rotary cathode, Planar cathode |
| Thermal source | Crucible, E-beam | |
| Coating material | Metal material | Al, Ti, Cr, Cu, NiCr, Ni, Ag, other metal material |
| Reactive material | TiO2, Nb2O5, SiO2, TIO, SiAlOx, MoOx, other nitride / oxide material | |
| Power supply | DC, Pulse DC, MF | |
| Thickness uniformity | ±10% or less (Static film) ±5% or less (Moving film) | |
| Measuring instrument | Sheet resistance, optic (Transmittance, reflectance, color-difference meter), | |
| plasma emission monitor, RGA | ||
| Household appliances field | Decorative coating on household products and exterior of mobile devices | |
| Energy field | Architectural window glass, solar cell | |
| Other industrial field | Metal thin film and oxide thin film, multi-layered thin film coating based application field | |
Xiangtan Hondson Coating Technology Co., Ltd. has enjoyed conspicuous success in the design, manufacture of PVD Vacuum Coating Machines. We are specialized in innovative PVD technology, as well as equipment for various applications, including electronics, thin film deposition, vacuum coated glass, automotive, plastic decorations, harden protective coatings on tools, molds, drills, knives, etc. Our high quality Vacuum Coaters are sold to foreign and domestic markets and win their praise and good graces. We are happy to establish business relationship with customers all over the world. If you are interested in our products, or you are looking for cooperation partners in China for Vacuum Coating Equipment, welcome to contact us for further information. Every machine is designed according to customer's real requests.
In order to help you choose the best suitable PVD coating machine, please try to reply my questions below, thanks for your cooperation.
Q1: What is your product, and the max. dimension?
Q2: The size of your processing material, your desired daily production capacity?
.
){kind=link}