| Customization: | Available |
|---|---|
| After-sales Service: | Engineers Can Be Sent to The Worksite |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PVD Vacuum Coating System For Hard Coatings On Metal Tools
| About Cathodic Arc Evaporation |
In this process, an arc with a diameter ranging from microns to just a few tenths of a micron, is run over the solid, metallic coating material, causing it to evaporate. The high currents and power densities used cause almost complete ionization of the evaporated material and, thereby, the formation of a high-energy plasma.
The metal ions combine with a reactive gas that is introduced into the chamber, strike the target tools or components with high energy and are deposited as a thin and highly adherent coating.
| About the process |
1. Argon
2. Reactive gas
3. Arc Sources (coating material and backing plate)
4. Components/Tools
5. Vacuum pump
PS: All the origin of standard parts can be replaced under the customer's demands.
| Technical Spcifications |
| Model Number | ARC-600 | ARC-900 | ARC-1000 | ARC-1200 |
| Dimension of vacuum chamber(diameter*height) | 600*700mm | 900*1000 | 1000*1100 | 1000*1200 |
| Material of vacuum chamber | SUS304 or SUS316L with cooling jacket | |||
| Quantity of arc sources | 1-4 sets | 6-9 sets | 8-12 sets | 10-14 sets |
| Pumping system | molecular pump or diffusion pump+mechanical pump | molecular pump or diffusion pump+mechanical pumps, booster pump | ||
| Pumping Time | From atmosphere to 5.0*10-2Pa less than 8 minutes | |||
| Bias Power Supply | 10kW | 15kW | 20kW | 20kW |
| Gas distribution System with Mass Flow Controllers | ≥3 sets | |||
| Vacuum Limit | 5.0*10-4 Pa | |||
| Working temperature | Up tp 550 centigrades | |||
| Working mode | Automatic or Manual mode, by 10.4 inches PLC touches screen | |||
| Total Power | 40-120kW | 40-120kW | 40-120kW | 70-180kW |
| Footprint | 2*2 meters | 2*3 meters | 3*3 meters | 3*3 meters |
| These units you can custom made | 1. Size of vacuum chamber 2. Quantity of arc sources 3. Configurations of pumps 4. Gas distribution system |
|||
| Optional instruments | 1. Coatings thickness monitor 2. Leakage detector 3. Magnetron sputtering system 4. Evaporation system |
|||
We produce vacuum metallizing machine, arc deposition machine(also called "arc ion plating machine") and magnetron sputtering machine.
We have been providing good quality PVD systems and constant technical service for our clients all over the world.
As a manufacturer of PVD coating systems, Hondson VAC responds to your wishes and supply you with a tailor-made system that meets your needs. To improve profitability, we build on our proven cylindrical standard recipients, but any other type of vacuum chamber is also possible. Contact us!
1. What size of the PVD coating machine do you have?
Answer: We do have different models of PVD coating machine. But usually we recommend the machine according to the size of the max. parts of customers. Since we have seen the drawing of pcs from you, we will make sure the machine can coat all of your pcs and reaches to the desired capacity.
2. What material do I need for running the machine?
Answer: We will send you a list of the raw material and spare parts for your kind reference.
3. Do I need pretreatment or other machines for the PVD process?
Answer:
When you choose different machine, you will need:
For Vacuum Metallizing Machine: Air Compressor, Chiller, (UV) Painting & Coloring Line
For Magnetron Sputtering Machine:Air Compressor, Chiller, (UV) Painting Line, High Purity Gases
For Arc Ion Plating/Deposition Machine:Air Compressor, Chiller, Ultrasonic Washer, Pure Water Machine, High Purity Gases
You could also need the transformer(from 380V 50Hz to your local voltage.)
4. What is my guarantee if I order from you?
Answer:
We have been exported the PVD coating machine for more than 10 years and our vacuum equipment were installed in more than 20 countries all over the world. We have good reputation on the quality and our service.
5. Who will install the machine?
Answer: We will send our specialists to your worksite to provide all technical assistances for the PVD machine.
6. If the customer would like to have a visit, what is the nearest airport city in which the company is located?
Answer: Changsha Huanghua Airport
7. How far the factory is from Guangzhou?
Answer: By fast train only 2.5 hours from Guangzhou South railway station.
Company Service:
1. Fast and professional reply to your questions.
2. Expert sales person will provide you professional suggestion to you based on your correct needs for the configurations of the PVD equipment.
3. Detailed and clearly explain to you when you come to our factory for visiting before contract
4. Engineers overseas installation and training, all our engineers are rich experience for overseas working
5. Guarantee you steady supply for the spare parts with the lower prices
6. One-stop and customize service for you, all machines are available from us 24 Hours online service, 7 days a week support for you if any technical questions or problems about PVD coating machine.
Inquiry Guide:
The PVD coating machine can be used for different materials and industries. In order to recommend you the appropriate machine, we need your help on telling us:
What is the material of your product?
What is you maximum part size?
What is the size of your parts most in common?
What is the desired quantity of parts to be coated daily?
What are your desired coatings or coating colors?
){kind=link}